Simple and powerful F.M. Receiver

Communication in F.M. band is easy, less expensive and has many more advantage. As we have already published Simple F.M. transmitter circuit in previous article. Now, here is a circuit diagram with description of Powerful F.M. receiver using single IC used to receive frequency range of 88 MHz to 108 MHz in F.M. band. You can also use F.M. receiver circuit in radio, tape recorder, stereo etc.

Circuit Description simple and powerful F.M. receiver

With the circuit described here (F.M. receiver) one can easily receive F.M. signal and is build around IC TEA5591 (IC1). Transmitted F.M. R.F. signal is received by telescopic antenna and is given to pin 2 of IC1 passes though band pass filter made from coil L2 and capacitor C4. R.F. signal given to IC1 is amplified and is tuned with the help of capacitors C9, C13 and coil L1. Coil L3 with capacitors C8 and C14 is configured as oscillator and its output is given to pin no 22 and 23 of IC1 in order obtain IF frequency by mixing with tuned R.F. frequency. Tuned IF frequency of 10.7 MHz is obtained from amplifier made from coil L4 and capacitors C10 & C11. Ceramic filter XT1 and XT2 is used to filter IF frequency and is given to pin no 4 of IC1. Internal detector stage is used to detect F.M. signal. Finally output from F.M. receiver is obtained from pin 11 and is given to audio amplifier stage.

f.m. receiver

PARTS LIST

Resistor (all ¼-watt, ± 5% Carbon)

R1 = 820 Ω

Capacitors

C1, C2 = 4.7 µF/35V

C3, C5 = 470 PF

C4 = 22 PF

C6 = 0.02 µF

C7, C10 = 0.01 µF

C8, C9 = 27 PF

C11 = 47 KPF

C12 = 220 µF/25V

VC1 = 22 PF

VC2 = 39 PF

Semiconductors

IC1 = TEA5591

D1 = 1N4007

Miscellaneous

L1, L3 = 3 turns on any pencil ; 21 gauge wire

L2 = 5 turns on any pencil ; 21 gauge wire

L4 = F.M. I.F.T.

XT1, XT2 = 10.7 MHz

Antenna

Related Project

Bass Booster boosts the beat frequency without effect the high frequency of the music
Signal Booster Short Wave Radio convert the old valve radio into a power pack receiver
Walky-Talky world 1st verified walky-talky project without using coil.
Simple FM TransmitterTransmit noise free F.M. signal in the wide range up to 100 M using only one transistor
70/40 Watts Hi-Fi Amplifier world best Hi-Fi amplifier you may never have to replace by a better one

Audio